Never straighten or weld damaged cutting tools.
Operate the Brush cutter/String trimmer with as little noise and contamination as –
possible. In particular check the correct setting of the carburetor.
Clean the Brush cutter/String trimmer at regular intervals and check that all –
screws and nuts are well tightened.
NeverserviceorstoretheBrushcutter/Stringtrimmerinthevicinityofnaked –
flames.
Always store the Brush cutter/String trimmer in locked rooms and with an emptied –
fuel tank.
Whencleaning,servicingandstoringtheequipment,alwaysattachthecoverto –
the cutting blade.
Observe the relevant accident prevention instructions issued by the relevant trade
associations and by the insurance companies.
Do not perform any modifications on the Brush cutter/String trimmer as this will
endanger your safety.
The performance of maintenance or repair work by the user is limited to those
activities as described in the instruction manual. All other work is to be done by an
AuthorizedServiceAgent.Useonlygenuinesparepartsandaccessoriesreleased
and supplied by DOLMAR.
Use of non-approved accessories and tools means increased risk of accidents.
DOLMAR will not accept any liability for accidents or damage caused by the use of
nonapprovedcuttingtoolsandfixingdevicesofcuttingtools,oraccessories.
First Aid
In case of accident make sure that a first-aid box is available in the vicinity of the
cutting operations. Immediately replace any item taken from the first aid box.
When asking for help, please give the following information:
Place of accident –
What happened –
Numberofinjuredpersons –
Kindofinjuries –
Your name –
Vibration
People with poor circulation who are exposed to excessive vibration may –
experienceinjurytobloodvesselsorthenervoussystem.Vibrationmaycause
thefollowingsymptomstooccurinthefingers,handsorwrists:“Fallingasleep”
(numbness),tingling,pain,stabbingsensation,alterationofskincolororofthe
skin.Ifanyofthesesymptomsoccur,seeaphysician!
Toreducetheriskof“whitefingerdisease”,keepyourhandswarmduring –
operation and well maintain the equipment and accessories.
6
For European countries only
EC Declaration of Conformity
The undersigned, Tamiro Kishima and Rainer Bergfeld, as authorized by Dolmar GmbH, declare that the DOLMAR machine(s):
Designation of Machine: Brush Cutter/String Trimmer
ModelNo./Type:MS252,MS253
Specifications:see“TECHNICALDATA”table
are of series production and
Conforms to the following European Directives:
2000/14/EC,2006/42/EC
Andaremanufacturedinaccordancewiththefollowingstandardsorstandardizeddocuments:
ENISO118061
The technical documentation is on file at:
DolmarGmbH,
JenfelderStraße38,AbteilungFZ,D22045Hamburg
The conformity assessment procedure required by Directive 2000/14/EC was in Accordance with annex V.
Measured Sound Power Level: 109.1 dB
GuaranteedSoundPowerLevel:111dB
3. 11. 2009
Tamiro Kishima
Managing Director
Rainer Bergfeld
Managing Director