Operation
CF-25, CF-35, CF-40, CF-50, CF-60
➤ Press the “SET” button (Fig. 4 4, page 4) once.
➤ Use the “UP +” (Fig. 4 6, page 4) and “DOWN -” (Fig. 4 7,
page 4) buttons to select the cooling temperature.
✓ The cooling temperature appears in the display for a few
seconds. The display flashes several times and then the current
tempera-ture is displayed again.
6.7 Switching off the cooler
➤ Empty the cooler.
➤ Switch the cooler off.
➤ Pull out the connection cable.
If you do not want to use the cooler for a longer period of time:
➤ Leave the cover slightly open. This prevents odour build-up.
6.8 Defrosting the cooler
Humidity can form frost in the interior of the cooling device or on the
vaporiser. This reduces the cooling capacity. Defrost the device in
good time to avoid this.
a
Caution – Danger of damaging the device!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooler, proceed as follows:
➤ Take out the contents of the cooling device.
➤ If necessary, place them in another cooling device to keep them
cool.
➤ Switch off the device.
➤ Leave the cover open.
➤ Wipe off the defrosted water.
_CF-18_60.book Seite 41 Donnerstag, 26. Juli 2007 3:18 15
20
To Next Page
Loading...
