Dometic CU402 - Installation Procedures; Fitting Cavity and Dimensions; Gas and Electric Connections

4. USE
EN
12
WARNING
WARNING
Before cleaning the appliance always turn it off and disconnect from power supply and wait
until it has cooled down.
WARNING
WARNING
Do not use alcohol or solvents to clean any part of appliance.
WARNING
WARNING
Never use abrasive and / or coarse cleaning materials or metal brushes to clean the glass
oven door as these materials scratch the glass surface with the risk of shattering the glass.
WARNING
WARNING
Never use steam cleaners to clean the appliance.
CAUTION
CAUTION
Hot surfaces may be damaged on contact with cold water or with a wet cloth. Do not use
abrasive, corrosive or chlorine-based products, pot scourers or steel wool. Do not leave
acid or alkaline substances (vinegar, salt, lemon juice, etc.) on the surfaces of the appliance.
Glasses, stainless steel surfaces and enamelled parts must be washed with water and neutral
soap or detergent, rinsed and dried. Use clean sponges and cloths.
CAUTION
CAUTION
Do not leave heavy spillover to bake on, as this will make cleaning more difficult.
CAUTION
CAUTION
The trivet (pan support) can be removed by carefully pulling the extended pins evenly out of
the plastic locaters in the hotplate. When replacing the trivet, ensure that the plastic guides
are not damaged.
4.10 Abnormal Operation
Gas valves, which are difficult to turn are considered to be abnormal operation and may require servicing.
In case the appliance fails to operate correctly, contact the authorised service provider in your area.
5. INSTALLATION
5.1 Dimensions of the appliance
The overall dimensions are illustrated in FIG. 5 - PG. 24 with the cavity diagrams.
The overall dimensions include the trivet (pan support), control knobs, handles and gas connection.