7
EN
Range General Information
4 General Information
This section provides reference information on the
tooling, model identification, components, and
terminology associated with the different range models.
I
The images used in this document are for reference
purposes only. Components and component
locations may vary according to specific product
models. Measurements may vary ±0.38 in. (10 mm).
4.1 Tools and Materials
Dometic recommends that the following tools and
materials be used while servicing the ranges:
Recommended Tools
Manometer Pressure Gauge
Screwdriver Volt Meter
Zip Ties
4.2 Model Identification
This section explains the breakdown of the model
identification numbers.
D21 Models
D 2 1 B E C
Grate Type
Ignition Type
Cooktop Color
Series Number
Number of Burners
Type of Appliance
Type of Appliance D = drop-in
Number of Burners
2
Series Number
1
Cooktop Color
• B = black
• S = stainless steel
Ignition Type
• M = match light
• P = Piezo
• B = battery
• E = 12 VDC
Grate Type
• W = wire
• C = cast
DV20 and DV30 Models
DV 2 0 B S E
Ignition Type
Burner Type
Cooktop Color
Revision Number
Number of Burners
Type of Appliance
Type of Appliance DV = drop-in, Vision
Number of Burners
• 2
• 3
Revision Number
• 0
• 1
• 2
Cooktop Color
• B = black
• W = white
• S = stainless steel
• C = chrome
Burner Type
• S = sealed burner
• P = porcelain
Ignition Type
E = electronic
R31 Models
R 21 3 1 B B P F B R
Shipping
Trim Color
Grate Type
Ignition Type
Door Color
Cooktop Color
Series Number
Number of Burners
Oven Size
Type of Appliance
Type of Appliance R = range
Oven Size
• 17 = 17 in. (432 mm)
• 21 = 21 in. (534 mm)
Number of Burners
3
Series Number
1
Cooktop Color
• B = black
• S = stainless steel
Door Color
• B = black
• S = stainless steel
Ignition Type
• M = match light
• P = Piezo
Grate Type
• F = flat wire
• C = cast
Trim Color
• B = black
• M = silver (metalized)
Shipping
• O = OEM single pack
• R = returnable
To Next Page
Loading...
