INFORMATION ON MOVEMENT AND INSTALLATION
RECOMMENDATIONS FOR MOVEMENT AND INSTALLATION
– When moving and installing the appliance, follow the indications provided by the manu-
facturer and marked on the packaging and in the instructions for use. Those authorised
to carry out these operations must, if necessary, organise a "safety plan" to safeguard the
persons directly involved.
PACKING AND UNPACKING
– The packaging, to reduce working dimensions, may vary according to the type of transport
being used.
– To facilitate transport, the appliance may be shipped with some of its components disman-
tled and suitably protected and wrapped.
Certain parts, particularly electrical components, are protected with damp-proof nylon.
– During unloading, check that the components are undamaged and that all the componen-
ts are present.
– The packing materials must be disposed of in compliance with current laws.
The illustration shows the type of packaging used.
To Next Page
Loading...
