LOADING AND TRANSPORT
– Loading and transport, accor-
ding to the place of destination,
may take place using different
means.
– The following diagram illustrates
the most common solutions.
– During transport, in order to
avoid sudden movements, make
sure the load is adequately fa-
stened to the vehicle.
MOVEMENT AND LIFTING
The unit can be moved using a fork lift truck or hoist of suitable capacity.
To lift the equipment with a hook device, use the appropriate lifting belts as indi-
cated in the illustrations.
Before lifting, check that the load is properly centred.
Move the load with care, so as to avoid sudden and dangerous swinging.
To Next Page
Loading...
