As an example, the illustration shows the minimum and maximum temperatures of use
for the various lubricant grades.
If a ”MONOGRADE” type lubricant is used (for example 10W, 30, etc.), choose the
grade based on the average ambient temperature in which the equipment is used.
CHECK OIL LEVEL
Check the oil level when the equipment is perfectly level.
Proceed as indicated.
1 -Turn the unit on and allow it to
warm up for a few minutes.
2 -Turn the unit off.
3 -Wait for a few minutes to allow all
the oil to flow into the sump.
4 -Open the door (A).
5 -Extract the dipstick (B) and check
the oil level; top up if necessary. For
the amounts of oil, see "Technical
data".
To Next Page
Loading...
