Dometic tec 30d ev - Installation with Hanging Equipment (Type A)

- 22 - Use, maintenance and installation instructions
TEC 30D EV
GB
– The equipment can be installed in a "hanging" (type A) or "resting" position (type B) (see
figure)
Installation with hanging equipment (type A)
Proceed as indicated.
1 -Remove brackets (A) and install them upside down.
2 -Identify the exact position using the boring template (B), supplied in the pack, and drill
the holes.
40200801300.tif
TYPE “B”TYPE “A”
40200801400.tif
Bracket (A)
Drilling template (B)