OVER TEMPERATURE Inverter overheating
Switch the appliance off and lea-
ve it to cool.
LOW POWER ENGINE Engine revs too low Decrease the required load
RESTART GEN? Unit overheating
Switch the appliance off and lea-
ve it to cool
GEN CAL
The unit is performing automatic
set-up prior to starting
Wait until the operation has en-
ded then start the unit
GEN WAIT
The pre-heating sparking plug is
operating
Wait for the end of the pre-heating
phase and start the equipment
GEN ON Unit running
GEN OFF
The equipment is off and ready
for START
Table 7: Alarm list
Alarm Problem Remedy
To Next Page
Loading...
