Dometic VARC 72 - EVO Configuration & Regulation; EVO Configuration Parameters; Regulation Parameter Details

33
Program/Factory/Configuration/EVO Configuration
Configuration
Valve Select Type
Main Regulation Select Type
Auxiliary Regulation Select Type
Probe Configuration
Probe S1
Probe S2
Probe S3
Probe S4
Alarm
Enable/Disable
Enable/Disable
Enable/Disable
Enable/Disable
Type
Select
Select
Select
Select
Minimum
#.# barg
#.# barg
Maximum
#.# barg
#.# barg
Alarm Min.
#.# barg
# °C
#.# barg
# °C
Alarm Max.
#.# barg
# °C
#.# barg
# °C
Alarm Mngt
Use backup S3/valve
at fixed pos/valve
forced closed/no
action
valve at fixed
pos/valve forced
closed/no action
Use backup
S3/valve at fixed
pos/valve forced
closed/no action
valve at fixed
pos/valve forced
closed/no action
Regulation
Valve opening at start-up # %
Valve opened in standby # %
Prepositioning delay # s
PID Parameters
Prop. Gain #
Integral time #
Derivative time #
Integral Time
LowSH protection # s
LOP protection # s
MOP protection # s
Alarm delay
Low SH # s
LOP # s
MOP # s
Alarm low suction temp
Threshold # °C
Timeout # s
Custom
Minimum steps #
Maximum steps #
Closing steps #
Nom. Step rate # Hz
Fast step rate # Hz
Holding current # mA
Duty cycle # %
Opening synchronicity Yes/No
Closing synchronicity Yes/No
EVO Configuration
Configuration
Regulation
Custom