EPT058613 Issue 1 March 2020 3
WARNINGS: (1) As supplied, this coder is a class 4 laser product. During
operation, it will emit up to 140 watts of pulsed invisible laser
radiation at a wavelength between 1040 and 1200 nanometers.
Avoid eye or skin exposure to direct or scattered radiation.
(2) The products contain embedded laser devices that emit
invisible radiation in the region of 900 - 1000 nm with a total
output power of up to 140W for the rated output power of the
laser modules: this radiation is not accessible to the user
unless the protective housing is opened.
(3) The products contain embedded laser devices that emit
visible radiation in the region of 630 - 670 nm with a total
output power of up to 5 mW for the rated output power of the
laser modules.
(4) The laser may emit significantly higher powers under a single
fault condition (<120 W 1030 – 1200 nm; <100 W 900 – 1000
nm).
(5) This coder must be fitted with class 1 laser safety guarding, to
safeguard against accidental exposure to direct or scattered
radiation before it is operated or made ready for use.
(6) Guidance on creating and fitting laser guarding can be found
in part 1 of the Product Manual.
(7) Use of controls or adjustments of performance or procedures,
other than those specified in this manual, may result in
hazardous radiation exposure.
To Next Page
Loading...