31
3.4 SAFETY RULES FOR THE UTILIZATION
While working:
• Operate with all the adequate protections at the right plance and in
perfect efficiency.
• Do not place hands or tools in forbidden places or behind the foreseemn
protections.
3.5 SAFETY RULES FOR MAINTENANCE
While carrying out maintennace operations:
•
Be sure that the power is turned off and the machine completely
isolated.
• If some parts are to be replaced, these must be original ones or at least
indicated by the supplier.
3.6 SAFETY GRAPHICAL SYMBOLS
DANGER : this symbol indicates the danger connected with the precence of
electrical current.
To Next Page
Loading...