30
3
– SAFETY PRECAUTIONS
3.1 SYMBOLS USED
Some paragraphs of the present manual are very important both for the safety of the operator and for the
correct running of the machine.
Such paragraphs are recalled by some unified symbols to draw the attention of the operator while consulting
the manual.
The symbols used are the following:
ATTENTION FORBIDDEN
3.2 GENERAL SAFETY RULES
To operate the machine correctly, one must follow the safety rules below carefully:
Do not use the machine for other purposes than those foreseen and which are
recalled in this manual. If this rule is not observed, the supplier will be
released from any responsibility whatever.
The improper use of products other than those indicated are fobidden.
• The user or controller of the machine must know the contents of the present manual.
• The operator of the machine must avoid the use of the same by inexpert users;
• The safety devices must always be in efficiency;
• The plates and graphical symbols on the machine must be kept clean;
• All the graphical and written advices indicated on the machine must be respected.
3.3 SAFETY RULES FOR HANDLING
The handling of the machine does not requie any particular measures.
Care must be taken so that while handling the machine is not damaged.
To Next Page