Doms PSS 5000 Installation Guide

PSS5000/INGU/805799/09 5 of 27
PSS 5000 – Installation Guide
2 Installing the PSS 5000 Forecourt Controller
2 Installing the PSS 5000 Forecourt Controller
Prerequisites
The cabinet must be mounted close to a suitable Mains power supply, an
Ethernet connection, and the ends of the communication cables for both the
forecourt and POS devices.
Installation Process
This process lists the separate stages involved in installing the PSS 5000.
Note: It is assumed that the correct Hardware Interface Modules (HIMs)
are present and the protocols are assigned to the relevant ports.
What’s next!
On completion of the installation process, you are ready to start configuring
the system. The configuration process is described in the Online Help of the
FCC Web Application.
Stage Description
1 Mount the Cabinet
2 Power Up the PSS 5000
3 Set the IP Address
4 List the Protocol to Port Assignments
5 Cable the Forecourt Devices
6 Validate Device Connectivity

Doms PSS 5000 Specifications

General

Brand	Doms
Model	PSS 5000
Category	Controller
Language	English