12
1800-060 Issued 7-19
Version A
1.3.2 Self-Standing Lighted Kiosk Installation for 1803 & 1810
10
”
18
.5”
60”
The flush mount kit (Sold separately) is installed into the self-standing
kiosk (P/N 1200-170) to secure the flush mount 1803 or 1810 in place.
Secure the rough-in box in the kiosk. Run all necessary wires to rough-in
box. Slide the trim ring into the rough-in box. Slide the enclosure in the
trim ring and secure them all together with hardware included in the kit.
Flush Mount
Enclosure
Plastic Spacer
Locknut
Knock-outs
Rough-In
Box
Trim
Ring
WARNING! If this entry
system is used to control a
vehicular gate with an
automatic gate operator, the
entry system must be
mounted a minimum of six
(6) feet away from the gate
and gate operator, or in
such a way that a person
cannot operate the entry
system and touch the gate
or gate operator at the same
time.
To Next Page
Loading...
