48
1800-060 Issued 7-19
Version A
Complete the information in the tables on the following pages to maintain a record of the information that has been
programmed into the telephone entry system.
6.1 Log Tables
Beginning Time
Ending Time
Days of the Week
Automatic Relay Activation Time Zones (section 3.4.2)
Zone 1 - Relay 1 Zone 2 - Relay 1 Zone 3 - Relay 2 Zone 4 - Relay 2
Momentary Activation
Relay Hold OPEN
Relay RELEASE
Relay Hold OPEN 1 Hour
Factory - 9
Factory - 8
Factory - 7
Factory - 6
Factory - 5
Factory - 4
Factory - 3
Factory - 2
Relay 1 Relay 2
Tone Open Numbers
(section 3.1.6)
Switch Input 1-Relay 1 Switch Input 2-Relay 2
Postal Lock Activates (section 3.1.7)
Factory Set
Beginning Time
Ending Time
Days of the Week
Lower Boundary #
Upper Boundary #
FOUR-Digit Entry Code Time Zone (section 3.4.3)
Beginning Time
Ending Time
Days of the Week
Lower Boundary #
Upper Boundary #
FIVE-Digit Entry Code Time Zone (section 3.4.4)
Relay 1 Relay 2
Relay Strike Time (section 3.1.3)Master Code (section 3.1.1)
Factory - 1 sec. Factory - 1 sec.
1st Digit 2nd Digit 3rd Digit 4th Digit
01
02
03
04
05
06
07
08
Area Code Reference Number
(section 3.2.11)
Area Code
Area Code Reference Number
(section 3.2.11)
Area Code
09
10
11
12
13
14
15
Area Code Note: Used for 7-Digit Phone Numbers Programming ONLY.
1
2
3
4
Relay 1 Hold Code Hold Four-Digit Entry Code
5
6
7
8
Relay 2 Hold Code Hold Four-Digit Entry Code
(section 3.3.5)
Four-Digit Entry Code Divide Number (section 3.3.4) Five-Digit Entry Code Divide Number (section 3.3.9)
Factory - 9999 Factory - 99999