DoorKing 6006 User Manual

Actuator Arm and
Control Box Mounting
6006
6006
6006
Copyright 2020 DoorKing
®
, Inc. All rights reserved.
Vehicular Swing Gate Operator
To wire this operator and complete the installation, refer to a specific control box “Wiring/Owner’s manual”.
Date Installed:
Installer/Company Name:
Phone Number:
Leave Manual with Owner
Circuit Board
Serial Number
and Revision Letter:
Conforms To UL STD 325
Certified To CSA STD C22.2 # 247
Entrapment Protection must be provided for the gate system where the risk of entrapment or obstruction exists. The operator
will NOT run without one or more monitored type B1 or B2 entrapment protection devices in EACH entrapment area.
UL 325 August 2018 Standard
THIS PRODUCT IS TO BE INSTALLED AND SERVICED BY A TRAINED GATE/DOOR SYSTEMS TECHNICIAN ONLY.
Visit www.doorking.com/dealer-locator to find a professional installing and servicing dealer in your area.
6006-065-B-3-20

DoorKing 6006 Specifications

General

Brand	DoorKing
Model	6006
Category	Gate Opener
Language	English

Summary

6006 Specifications

Swing Gate Requirements

ASTM F2200 Standard for Gate Construction

Important Safety Instructions

Crucial safety warnings and guidelines for operating the gate operator.

Instructions Regarding Intended Installation

Guidelines and prerequisites for installing the gate operator correctly.

Important Notices

UL 325 Entrapment Protection

UL 325 Classifications

Details the different UL 325 classifications for gate operators and associated protection types.

Glossary

INSTALLATION

Manual Release

Explains how to manually disengage the operator for gate movement.

Gate Layouts

90° Layout "PULL to Open"

Details the mounting and measurements for a 90° "Pull to Open" gate layout.

90° Layout "PUSH to Open"

Details the mounting and fabrication for a 90° "Push to Open" gate layout.

Operator Mounting Options

Bracket Installation

Instructions for assembling the mounting brackets for the operator.

Welding Brackets to Surfaces

Guidelines for tack welding and fully welding mounting brackets securely.

Mounting 115 VAC Control Box

Dual Operator's Connection

Explains how to connect primary and secondary operators, including wiring.

Mounting Solar Control Box

Solar Cabinet Mounting Holes and Conduit Holes

Details the mounting points and conduit routing for the solar control box.

Install Warning Signs

In-Ground Loops

Entrapment Protection Locations

Accessory Items

Type B2 Contact Sensors

Lists available Type B2 contact sensors for entrapment protection.

Type B1 Non-contact Sensors

Lists available Type B1 non-contact sensors for entrapment protection.

Control Box Types

Details different control box options for the gate operator system.

Loop Detection Systems

Details plug-in and external loop detectors for gate operation.

6006 Primary/Secondary 4302 Circuit Board Connection

Quick Guide for 6006 Limit Sensors