Operating & Maintenance Manual OPERATION
34 Book: 46551819 (2-11-2011) Rev B
CONTROL PANEL
1. Compressor Discharge Pressure Gauge - Indicates pressure in receiver tank, psi
(kPa).
2. Hourmeter - Records running time for maintenance.
3. Service Air Button - After warm-up, PUSH. Provides full air pressure at the service
outlet.
4. Power Switch - Rotate to “ON” position to activate system prior to Starting. Rotate
“OFF” to stop engine.
Before Starting
• Open service valve(s) to ensure pressure is relieved in receiver-separator system. Close
valve(s) in order to build up full air pressure and ensure proper oil circulation.
• Check battery for proper connections and condition.
• Check battery for proper connections and condition.
• Check engine coolant level.
1
2
3
4
To Next Page
Loading...
