DE08TS Diesel Engines Maintenance of Major Components
This feed pump is mounted with a priming pump
designed to permit manual feeding of fuel from the
fuel tank with the injection pump mounted in the
engine. During the manual feeding operation, air
must be bled from the fuel lines.
When using the priming pump, fix it securely to pre-
vent the possible entry of moisture or other foreign
substances in the inside of feed pump.
In addition, a strainer is fitted into joint bolt on the
inlet side of the fuel feed pump to filtrate any foreign
substances possibly mixed in fuel.
81
(A)
Inlet side
(B)
Outlet side
(C)
Interruption
EB1M4003
Strainer
To Next Page
Loading...
