23
Go to Table
of Contents
44 KL1 – KL2 Are Open
Car doors are not physically closed in bypass mode.
Check KL1 and KL2 inputs and related door contacts.
Cause
Troubleshooting
1. When bypass switch is open in 1 or 2 or 3 position but the KL1
or KL2 signals are not both active, then this error appears.
2. Close all doors and check if KL1 and KL2 have star beside by
pressing UP left arrow and locate the input indications.
TIP: Check electrical drawings pages 10-16-17
To Next Page
Loading...