Doran DS6200 - Weight Hold Beep Setting; Battery Voltage Information; Raw Counts for Troubleshooting; Software Revision Display

13
Weight Hold Weight Beep
bH
Enables/Disables beep when a stable or
average hold weight is achieved
n
Beep disabled.
y
Beep enabled. (default)
Battery Voltage Level
DC
Displays current battery voltage (DC)
Green Light on when charging: > 3.35 V
Full Battery: 3.35 V
50% Battery: 3.15 V
Low Battery: 3.05 V
Charge Battery: < 2.80 V
Raw Counts
xxxxx
Raw counts from A/D converter
View these numbers if calibration is
unsuccessful. Refer to Calibration
Troubleshooting for interpretation of these
numbers.
Software Revision
Eu
Displays Software revision
Battery Transport Mode
Disables Scale When in Transport
on
Normal Power Mode
of
Enter Power Control Mode – when in
weighing mode, press and hold ZERO for 5
seconds to exit this mode. This mode is to
be enabled when shipping the scale.