Contents User Manual
2 - 06/2021dormakaba Programmer 1460
Contents
1 Regarding this document 4
1.1 Validity 4
1.2 Target group 4
1.3 Contents and purpose 4
1.4 Document availability 4
1.5 Supplementary documentation 4
1.6 Abbreviations/definition of terms 5
1.7 Warnings 6
2 Basic safety instructions 7
2.1 Designated use 7
2.2 Safety information 7
2.3 Service and maintenance 7
2.4 ESD prevention measures 8
3 Product description 9
3.1 Overview 9
3.1.1 Layout 9
3.1.2 Display symbols 10
3.2 Scope of delivery 10
3.3 Technical details 11
3.4 Conformity 11
4 Operation 12
4.1 Control elements 12
4.1.1 ON/OFF button 12
4.1.2 Menu buttons 12
4.1.3 Navigation buttons and ENTER 12
4.1.4 Alphanumeric buttons 13
4.1.5 Home button 13
4.2 Switching on the programmer 13
4.3 Display dialogues 13
4.4 Wireless programming 14
4.5 Settings 14
4.5.1 Programmer settings 14
4.5.2 Actuator settings 19
4.5.3 Data settings 25
5 Programming 27
5.1 Setting the properties and functions of a component 27
5.2 System level 27
5.3 Export to components 29
5.3.1 Export to evolo components 29
5.3.2 Updating evolo components 29
5.3.3 Export to mechatronics cylinders 30
5.3.4 Updating a mechatronics cylinder 30
5.4 Import from components 31
5.4.1 Info 31
5.4.2 Read traceback 32
5.4.3 Diagnostic details 32
5.4.4 Import from digital cylinder, c-lever and reader 33
5.4.5 Import from mechatronics cylinder 33
5.4.6 Info for TouchGo components (signal strength) 34
5.4.7 Configuration 35
5.5 Manual settings 35
To Next Page
Loading...