5.4 Import from components
Activate the electronics on cabinet lock 21 10 by pressing briefly on the door.
When importing, the configuration data is transferred from the components to the
Programmer.
The following data is available for selection:
• Information (status data),
• Traceback,
• Configuration,
• Diagnosis data.
Existing configuration data of components is overwritten following confirmation on the
programmer.
The traceback and the configuration must be transferred to the system software for
evaluation with the Programmer.
5.4.1 Info
In this menu, information about the components is displayed.
Log in to the component using a master medium in order to display all available information
for this component. Basic information is always displayed (*).
Type* Actuator type
Name* Name of the actuator (if input, otherwise serial number of the actuator)
Tech* technology
Bat* Battery status
Clock* Date and time
SW* Firmware
S. No.* Serial number
L OS* LEGIC operating system
SL System level
BLE Mobile Access is available and activated/deactivated
TGO TouchGo
UID UID: Unique number
NW* Wireless
BIND* Wireless connection
ProgrammingUser Manual
31- 06/2021 dormakaba Programmer 1460
To Next Page
Loading...