Dormakaba BTS80 EMB/D - Install Spindle; Install the Door

dormakaba BTS80 EMB/D,E,F Installation Instructions
08059411 03-2021BTS80 EMB Closers
4
Spindle
Install door
. Install spindle
Fig.
1.5.1 With door parallel to frame, place bottom
arm onto closer spindle.
1.5.2 Align door and frame portions of top
pivot.
1.5.3 Install pivot pin, set screw and cover cap.
1.5.4 Install cover over bottom arm with screw
provided.
Spindle screw
Spindle
Washer
1.4.1 Slide washer over tapered square
end of spindle until fully seated in
groove.
1.4.2 Fasten spindle with spindle screw
provided.
1.4.3 Tighten securely with 5mm hex key.
CRITICAL:
WASHER MUST BE INSTALLED
. Install the door
Fig.