Need help?Do you have a question about the Dormakaba TS93 Series and is the answer not in the manual?
General| Category | Door Opening System |
|---|---|
| Mounting | Surface Mounted |
| Backcheck | Adjustable |
| Closing Speed | Adjustable |
| Latching Action | Adjustable |
| Body Material | Aluminum |
| Type | Cam Action Door Closer |
| Hold-open | Optional |
| Certifications | EN 1154 |
| Door Weight | Up to 120 kg |
| Finish | Silver |
General information, warnings, and door opening parameters for the TS93 GSR/EMF closers.
Chart for selecting the correct closer based on door width and type.
List of tools required for installation, including drill bits and drivers.
Diagram and list of components that make up the surface closer system.
Diagram and explanation for determining left-hand (LH) and right-hand (RH) door configurations.
Instructions and diagram for securing the back plate to the door.
Steps for mounting the closer body onto the installed back plate.
Guide for installing the slide channel and track assemblies.
Steps for attaching and adjusting the main arm assembly.
Instructions on securing the main arm to the slide shoe.
Guide for installing the coordinator components for synchronized door operation.
Steps for routing and securing the conduit for the electrical connections.
Further steps for installing the coordinator system, including connecting channels.
Wiring diagrams and instructions for connecting the electrical components (EMF units).
Guide to adjusting sweep, latch, backcheck, and delayed action speeds.
Instructions for adjusting the hold-open function and its activation.
Instructions on how to adjust the spring force of the closer.
Procedures for attaching end covers, center cover, and end caps to the closer.
To Next Page
