dormakaba Quick Start Guide
16
1.
5.9 Closing and locking the revolving
door electrically*
Personnel
• Operator
Special tool
• Key/code for program switch
Requirements
• The program switch is unlocked with a key / code
• All emergency stop switches are unlocked by turning
or pulling, depending on the type of the emergency
stop switch
• No persons are in or near the revolving door
Fig. 9 Select the program and pull the key
1. Switch off the revolving door with the program
switch ( Fig. 9 ).
» The revolving door rotates automatically into the
locking position and the door wings are locked.
2. Pull the key out of the program switch.
WARNING!
Risk of injury due to improper switching off of
KTV P/S/A!
A P/S/A type revolving door will move on its own
while being switched off. If there are people in
the revolving door when this happens, they may
be at risk of injury.
• Before switching the door off, make sure
that no one is in the revolving door.
To Next Page
Loading...
