17
Unlocking and switching on the revolving door
6 Unlocking and
switching on the
revolving door
Personnel
• Operator
Special tool
• Key/code for program switch
Requirements
• All manual locks are unlocked
• The program switch is unlocked with a key / code
• All emergency stop switches are unlocked by turning
or pulling, depending on the type of the emergency
stop switch
• No persons are in or near the revolving door
Fig. 10 Select program and pull the key
WARNING!
Risk of injury when changing the program of the
revolving door!
If there are people in the revolving door when
the program is changed, they may be injured by
the revolving door when it changes its behavior.
• Ensure that there are no people in the re-
volving door before changing the program.
1. Select the desired program using key / code ( Fig. 10 )
( Program switch, p.5).
» The revolving door will execute the selected pro-
gram.
2. Pull the key out of the program switch.
Closing and locking the
revolving door electrically*
To Next Page
Loading...
