32 Saflok RT/RT Plus Installation Guide PK3720_T 04-19
APPENDIX C Escape Return Model (79N)
C.1 ASM, ESM & ADB Inside trim assembly for 79N.
Note: 79N models are only for sale in Europe, where building codes allow. Use with mortise only.
Note: The inside trim assembly (E) for ASM/ESM and ADB on 79N models includes the part (E3) as shown below.
The position of the stopper (E3) is very important.
C.2 Installation of extension spring on inside trim.
1. On the inside trim assembly turn the lever to the correct
horizontal rest position for the handing of the door. install
the extension spring (L) between the handle (E6) and post
(E7).
2. Install the additional tension spring (E8) between the plate
(E12) and the post (E7), on the side opposite the lever han-
dle spring installed in the last step.
Autodeadbolt
Right Hand
Autodeadbolt
Left Hand
ASM Right &
Left Hand
E3
E3
L
E6
E7
E8
E7
E12
To Next Page