English
Tip: Your phone remembers Wi-Fi networks you connect to. If Wi-Fi is
turned on, the phone automatically connects to the network next time
you are within reach. Some open networks require you to log in to a web
page before gaining access to the network.
You can also enable Wi-Fi from the notification bar.
To set up a data account, see Data connectivity, p.52.
Software update
IMPORTANT!
You need an Internet connection to use this service. It is recommended
to use Wi-Fi connections when available to reduce costs for data traffic.
Contact your service provider for detailed subscription costs before
activating.
We recommend that you always update your device to the most recent
software version to get optimal performance and the latest
enhancements.
When a new software is available, a notification message is shown in the
status bar. Select it to start downloading. The download time may vary
depending on your Internet connection.
Check for software updates
1. From the Home screen, select Menu
Settings.
2. Select About device
System update Update.
3. If there is a new update, select Yes to start downloading the
software.
If there is no available update, select Close.
4. To start the installation, select OK.
Note! During the installation, your phone will be temporarily out of
service, even for emergency calls. All contacts, photos, settings, etc.
will remain safely stored in the phone. Do not interrupt the
installation.
5. Select OK to restart your phone. The restart may take a while, but
once it is complete you may use your phone as usual.
To Next Page
Loading...
