English
If necessary, suspend the call in heavy traffic or hazardous weather conditions
such as rain, sleet, snow, icy roads, and fog.
• Do not take notes, look up phone numbers, or perform any other activities that re-
quire your attention while driving.
Jotting down a to-do list or flipping through your address book takes attention away
from your primary responsibility, which is driving safely.
• Do not engage in stressful or emotional conversations that may be distracting.
Make people you are talking with aware you are driving and suspend conversations
that have the potential to divert your attention from the road.
Hearing aid compatibility
Note! For hearing aid compatibility, turn off Bluetooth connectivity.
Your mobile device model complies with FCC rules (C63.19-2011) governing hearing aid
compatibility. These rules require an M3 microphone or higher value. The M-value,
shown on the device box and below, refers to lower radio frequency (RF) emissions. A
higher M-value generally indicates that a device model has a lower RF emissions level,
which may improve the likelihood that the device will operate with certain hearing aids.
Some hearing aids are more resistant than others to interference. Please consult your
hearing health professional to determine the M-rating of your hearing aid and whether
your hearing aid will work with this device.
This device is set for direct connection to telecoil equipped hearing aids. When both the
telecoil hearing aid (T switch) and the phone telecoil are activated, using the device with
the aided ear will provide a direct connection for audio through your hearing aid. The
quality of sound depends on the type of hearing aid used. You should test the device
with the telecoil setting activated to determine whether your audio performance
improves.
Your device meets the M3/T4 level rating.
TTY compatibility
Your phone is TTY-compatible, allowing you to connect a TTY device to the phone’s head-
set jack. Please check with the manufacturer of your TTY device to ensure that it is com-
patible with digital cell phones. Before you can use your phone with a TTY device, you’ll
need to enable TTY Mode.
RF exposure information (SAR)
This model phone meets the government’s requirements for exposure to radio waves.
This phone is designed and manufactured not to exceed the emission limits for expo-
sure to radio frequency (RF) energy set by the Federal Communications Commission of
the U.S. Government and by the Canadian regulatory authorities.
The exposure standard for wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC and by the
Canadian regulatory authorities is 1.6W/kg. *Tests for SAR are conducted using stand-
ard operating positions accepted by the FCC and Industry Canada with the phone trans-
mitting at its highest certified power level in all tested frequency bands. Although the
69
To Next Page
Loading...
