English
Tip: If default storage location is set to memory card, all photos and
videos taken by the phone are stored in the DCIM/Camera folder on the
memory card.
Drag and drop content between phone and a computer
1. Connect your phone to a computer using a USB cable.
Note! You might need to wait for the driver to be installed on your
computer before you can access the phone.
Mac users, see https://www.android.com/filetransfer/.
2. You are prompted, on the computer screen, to choose what you can
to do when you connect your phone to a computer.
3. Select to open the device and view files in the computer’s file
explorer.
4. Wait until the phone/memory card appears as external disks in the
computers file explorer.
5. Drag and drop selected files between the phone and the computer.
6. If necessary, use the Safe to remove hardware function on your
computer
7. When done, remove the USB cable.
USB computer connection
You can select different connection modes for you phone when connect-
ing to a computer. Swipe down the notification bar and select
Con-
nected as a media device (camera/charging).
• Media device (MTP) — Lets you transfer media files on Windows, or
using Android File Transfer on Mac (see www.android.com/
filetransfer)
• Camera (PTP) — Lets you transfer photos using camera software,
and transfer any files on computer’s that don't support MTP
• Charging — Charge only
Note! When the phone/memory card is connected to the computer, the
phone cannot access the memory card. Some functionality and
applications in the phone, such as the camera, may not be accessible.
You can transfer files by using a USB cable on most devices and
operating systems supporting a USB Mass Storage interface.
To Next Page
Loading...
