English
Menu Security Remote config.
All contacts sent to Doro PhoneEasy
®
613 by remote configuration are
stored in the Phone (even if storage is set to SIM).
3 phone numbers for each contact
Mobile, Home or Office.
Note! SMS format must be *#Command#, otherwise the SMS cannot be
identified as a remote control command.
Parameters are the content you want to send and you must use # sign to
separate two parameters. In tables P = Parameters.
Setting a contact in the phonebook
Command P 1 P 2 P 3 P 4
phonebook
name
max. length=
30
mobile
max. length=
40
home
office
Example:
You want to send Jeff Jackson’s mobile number, home number and his
office number to Doro PhoneEasy
®
613. The mobile number is: 0700-
393939. Home number: 046-280 50 11. Office number: 046-280 50 83.
*#phonebook#Jeff
Jackson#0700393939#0462805011#0462805083#
The number will be saved in the 613 Phonebook as:
Jeff Jackson
0700393939
0462805011
0462805083
Note! Only use numerals for parameters 2, 3 and 4. If you use letters in
these parameters it will be stored as empty/blank in the Phonebook.
Contacts already saved in the Phonebook, will not be replaced. They will
be duplicated. This is to avoid unintentional removal of contacts from the
Phonebook.
51
To Next Page
Loading...
