R
Rebecca MilesAug 18, 2025
Why can't I add a contact to my Doro Cell Phone?
- SSamantha EdwardsAug 18, 2025
If you are unable to add a contact on your Doro Cell Phone, it's likely that the phonebook memory is full. Delete contacts to free up memory.
Why can't I add a contact to my Doro Cell Phone?
If you are unable to add a contact on your Doro Cell Phone, it's likely that the phonebook memory is full. Delete contacts to free up memory.
How to fix a Doro PhoneEasy 613 that cannot be switched on?
If your Doro Cell Phone cannot be switched on, there might be two reasons. First, the battery charge may be low. To solve this, connect the power adapter and charge the battery for 3 hours. Remember that full battery capacity is reached after the battery has been charged 3–4 times. Second, the battery might be incorrectly installed. In this case, check the installation of the battery.
What to do if my Doro Cell Phone shows a SIM card error?
If your Doro Cell Phone displays a SIM card error, it could be due to several reasons. The SIM card might be damaged, so check its condition and contact your service provider if necessary. Alternatively, the SIM card might be incorrectly installed; check the installation, remove the card, and reinstall it. Lastly, the SIM card could be dirty or damp; wipe the contact surfaces with a clean cloth.
Why is my Doro PhoneEasy 613 Cell Phone failing to charge?
If your Doro Cell Phone fails to charge, several factors could be at play. First, the battery or charger might be damaged, so check their condition. Second, ensure that you are charging the battery within the temperature range of 0 °C to 40 °C; improve the charging environment if necessary. Finally, the charger might be incorrectly connected to the phone or power socket, so verify those connections.
What to do if Doro Cell Phone has a weak signal?
If you are experiencing a weak signal on your Doro Cell Phone, it could be due to two primary reasons. First, you might be too far from the base station; try again from another location. Second, there might be network congestion; try calling at a later time.
Why does standby time decrease on my Doro Cell Phone?
If your Doro Cell Phone's standby time decreases, it could be due to a low battery charge capacity. In this case, install a new battery. Alternatively, if you are too far from a base station, the phone constantly searches for a signal, which consumes battery power. Find a place with a stronger signal, or temporarily turn off the phone.
Why is my Doro PhoneEasy 613 Cell Phone failing to place or receive calls?
If your Doro Cell Phone is failing to place or receive calls, call barring might be activated. Deactivate call barring. If this does not solve the problem, contact your service provider.
What to do if my Doro PhoneEasy 613 Cell Phone doesn't accept the PIN code?
If your Doro Cell Phone is not accepting the PIN code, it's likely that the wrong PIN code has been entered too many times. To resolve this, enter the PUK code to change the PIN code, or contact your service provider.
Why is my Doro PhoneEasy 613 failing to connect to network?
If your Doro Cell Phone fails to connect to the network, it could be due to an invalid SIM card. In this case, contact your service provider. Alternatively, there may be no coverage of GSM service; contact your service provider to confirm.
Why is there echo or noise on my Doro Cell Phone calls?
If you experience echo or noise on your Doro Cell Phone, it may be a regional problem from a bad network relay. Try hanging up and redialing; this may switch you to another network relay.
Dimensions | 108 x 46 x 12.5 mm |
---|---|
Weight | 120 g |
SIM | Mini-SIM |
Type | TFT, 256K colors |
Memory Card Slot | microSD, up to 32 GB |
Phonebook | Yes |
Call Records | Yes |
Camera | 3.15 MP |
Loudspeaker | Yes |
3.5mm Jack | Yes |
WLAN | No |
Radio | FM radio |
USB | microUSB 2.0 |
Messaging | SMS, MMS, Email |
Games | Yes |
Java | No |
Audio Jack | 3.5mm |
Resolution | 240 x 320 pixels |
Alert Types | Vibration, MP3 ringtones |
Battery | Li-Ion 800 mAh battery |