Doro PhoneEasy 621 - Page 36

English
You can handle more than one call at a time. An alert tone will be heard
if there is an incoming call while talking. To put the current call on hold
and answer the incoming call, press Options
Answer.
1. Press Menu
Settings Calls Call setup.
2. Select Call waiting:
• Activate to enable call waiting.
• Deactivate to disable call waiting.
• Query status to display if call waiting is active or not.
3. Press OK to confirm.
Call divert
You can divert calls to an answering service or to another phone number.
Set up which calls should be diverted. Select a condition and press OK,
then select Activate, Deactivate or Query status (see Call waiting, p.28)
for each.
1. Press Menu
Settings Calls Call setup.
2. Select Call divert:
• Voice calls to divert all voice calls.
• Unreachable to divert incoming calls if the phone is turned off
or out of range.
• No reply to divert incoming calls if unanswered.
• If busy to divert incoming calls if the line is busy.
• Cancel diverts no call divert.
3. Press OK to confirm.
Call barring
Your phone can be restricted to disallow certain types of calls.
Note! A password is needed to apply Call barring. Contact your service
provider to get the password.
1. Press Menu
Settings Calls.
2. Select Call setup
Call barring.
3. Select Outgoing calls:
• All calls to answer incoming calls but not dial out.
• Internat.calls unable to call international numbers.
29