English
Message
1. Press Menu
Settings Assistance SMS.
2. Select Message
Edit to write the message.
3. Press OK to confirm.
Note! You must write a message if you activate the SMS function.
Confirm with "0"
When the assistance function is activated the phone dials the first num-
ber on the list. If the call is not answered within 25 seconds, the next
number is dialled. Dialling is repeated 3 times or until the call is an-
swered, or until
is pressed by the user.
You can enable the Confirm with "0" function. If the receiver doesn’t
press
0
within 60 seconds the call will be disconnected and the next
number in the sequence will be called. If the receiver presses
0
within
60 seconds, the call is confirmed and no further call attempts will be
made (assistance sequence interrupted). To enable set the function as
On.
Signal type
Select the notification signal type for the assistance sequence.
1. Press Menu
Settings Assistance.
2. Select Signal type:
• High to use loud signals (default).
• Low to use one low signal.
• Silent no sound indication, like a normal call.
3. Press OK to confirm.
Alarm info
Please read the important safety information before enabling the assis-
tance function:
1. Press Menu
Settings Assistance Alarm info:
• Be careful about including numbers with automatic answering
in the call list, as the alarm sequence stops once the call is
answered.
2. Press Back to return.
35
To Next Page
Loading...
