Doro PhoneEasy 621 - Security and Remote Configuration; SIM and Phone Lock Activation; Remote Configuration Setup; Fixed Dial (FDN) Settings

English
3. Press OK to confirm.
Note! You need to input the current phone code to disable/enable Phone
lock. The default phone code is 1234.
Remote configuration
Allow persons that you trust, usually a family member or friend, to send
information to your Doro PhoneEasy
®
621. You can receive phonebook
contacts and contacts for speed dial keys, calendar tasks and settings
for the assistance button. When activated, you don’t have to do anything,
it’s the other person that sends information to you.
Activation
1. Press Menu
Settings Security.
2. Select Remote config
Activation.
3. Select On/Off to enable/disable.
4. Press OK to confirm.
Number list
You need to add the name and number of the people who are allowed to
send information from their phone to your Doro PhoneEasy
®
621.
1. Press Menu
Settings Security Remote config.
2. Select Number list
Empty Add.
3. Select Phonebook to add a contact from it.
Alternatively, press Manual.
4. Press
.
5. Enter the number and press OK to confirm.
6. Repeat until you have 5 contacts (maximum).
To edit or delete an existing entry, select it and press Options
View/
Edit/Delete.
Fixed dial (FDN)
You can limit calls to certain numbers saved on the SIM card. The list of
allowed numbers is protected by your PIN2-code.
1. Press Menu
Settings Security.
2. Select Fixed dial:
• Mode
On/Off to enable/disable.
38