Doro PhoneEasy 621 - Page 54

English
alert
m
message
0/1
0=Off
1=On
Text
max. length=
70
alert
c
confirm with
“0”
0/1
0=Off
1=On
alert
s
signal type
0/1/2
0=High
1=Low
2=Silent
Example: Activate the assistance function.
• *#alert#a#1#
Example: Store Jeff Jackson in Number list as position one (1) with
phone number: 0700-393939.
• *#alert#n#1#Jeff Jackson#0700393939#
Example: Enable the text message function to when the Assistance but-
ton is pressed. The text message should be: This is an assistance mes-
sage. Please take appropriate actions.
• *#alert#m#1#This is an assistance message. Please take appropri-
ate actions.#
Example: Enable the Confirm with "0" function.
• *#alert#c#1#
Example: Set the Signal type to low.
• *#alert#s#1#
Tip: Remember to write down the positions you send. This way it is easier
for you to send changes later.
Set the one touch memories
Command P 1 P 2 P 3
memorykey
a
A key
Name
max length = 20
number
max length = 40
memorykey b
B key
Name
max length = 20
number
max length = 40
47