Dostmann Electronic P700 Series - Menu; Measuring Unit Switching (UNIT)

5
Note: On all instruments you can select the measure-
ment category (chapter 1.4.2. Prob) according to the
model version. Instruments that are delivered only with
one probe the correct measurement category is preset.
In other case please check chapter 1.4.2. (Prob) for the
correct set-up.
1.4 Menu
The adjustments of the instruments like the measure-
ment value, calibration of Up and down keys probes,
deactivation of channels and so on are resulting from
the structure of the menu. You will reach into the main
menu by pushing [ENTER/MENUE]. With the up and
down keys [  ] you can choose your required menu
item. Push [ESC] to be back in the measuring mode.
Menu structure
1.4.1 Measuring unit switching °C and °F
respective %rH, td or g/m
3
/ [Unit]
Unit = Measuring unit
Measuring unit temperature
(°C=Celsius, °F=Fahrenheit)
Measuring unit humidity
(%rH=relative humidity, td=dew point, g/m
3
=absolute
humidity)
Important!
Unit
°C
°F
m/s
%rh
g/m
3
°C td
°F td
Pa
hPa
Prob Lin2 CAL Chnl ArEA Lo6
P
J
K
L
N
R
S
T
RH
D
Pr
H
T1-T2 oFF
oP1
oP2
OFF c OFF
ON mON
m
3
/s
❶ up and down keys
❷ key [ESC]
❸ key
[ENTER/MENUE]
❶
❷
❸