A-10
EXAMPLE OF TIMER ADJUSTEMENT
Monday to Saturday: proofer mode starts at 6:00 Am and stops at 8:00 Pm.
: retarder (fridge) mode starts at 8:00 Pm and stops at 6:00 Am.
Sunday: proofer mode starts at 7:00 Am and stops at 5:00Pm.
: retarder (fridge) mode starts at 5:00 Pm until next mode (proofer mode at 6:00 Am on Monday).
Note: On automatic mode, the proofer or the retarder is on. When the proofer stops, the retarder
automatically starts.
1. The time and day should have been set before doing this example (see previous pages).
2. Press PROG twice, you should see FR=20. Press to go back to the hour display.
If you don’t have FR=20, you should do a reset by pressing RES and return to #1. You have to do this
to avoid the existing program to overlap the new program.
3. Press PROG, you should see 1234567, select the days of the week by pressing DAY until you get
123456.
4. Select the hour (6:00 Am) by pressing H (hour) and M (min).
5. Press the HAND until you get on the bottom of the display.
6. Press PROG, you should see 1234567, select the days of the week by pressing DAY until you get
123456.
7. Select the hour (8:00 Pm) by pressing H (hour) and M (min).
8. Press the HAND until you get on the bottom of the display.
9. Press PROG, you should see 1234567, select the days of the week by pressing DAY until you get 7.
10. Select the hour (7:00 am) by pressing H (hour) and M (min).
11. Press the HAND until you get on the bottom of the display.
12. Press PROG, you should see 1234567, select the days of the week by pressing DAY until you get 7.
13. Select the hour (5:00 Pm) by pressing H (hour) and M (min).
14. Press the HAND until you get on the bottom of the display.
15. Press .
To Next Page
Loading...
Need help?
General
