EasyManuals Logo

DP Megacontrol Series User Manual

DP Megacontrol Series
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
34
1-1-9.1 Position suppl.valve e n Position of the supply valve proportional 0% ...
100%
1-1-9.2 Position suppl.valve closed
open
e n Position of the supply valve 1 = open 2 = closed
1-1-10 Power down speed s n Calculated power down speed if NFD is running in
energy saving mode
1-1-11 state NFC nfdMin
nfdInactive
nfdStableTime
nfdGoingDown
nfdFinished
nfdMax
d n Shows the current state of the no flow detection.
1-1-12 used setpoint d n used setpoint
1-1-13 NTC Temperature d n On board NTC temperature
1-1-14 WSD pulses tank 1 e n WSD Pulse count of the tank 1
1-1-15 WSD pulses tank 2 e n WSD Pulse count of the tank 2
1-1-16 WSD pulses tank 3 e n WSD Pulse count of the tank 3
1-2 Pumps e n Information on the operating status and measure-
ments of the selected pump
1-2-1 Operating mode e e Displaying operating mode of the selected pump
1-2-1.1.1 #0-0 Pump number 1
3
e e Selection of the pump of which the operating
mode is required
1-2-1.2.1 #1-0 Operating mode Automatic
Manual (on 10s)
Disabled (off)
e e Operating mode of the selected pump (continuous
active) - Automatic - Manual (on) - Disabled (off)
1-2-2 Pump load e n Displaying the load of the selected pump
1-2-3 Thermal fail. flags s n Displaying the activity status of all thermal protec-
tion inputs 0 = not active 1 = active
1-2-4 Running hours pump e n Displaying the total running hours per pump in
HHHHHH MM
1-2-5 Number of pumpstarts c n Displaying the total numbers of starts per pump
1-2-6 Rainwater pumps e n Information on the operating status of rainwater
pumps
1-2-6-1 Fill up to RW-p Off e e Function to fill water reservoir up to level B with
rain water.
1-2-6-2 Manual Run e e Perform a manual run for a given duration.
1-2-6-2.1.1 #0-0 Rainwater pump 1
2
e e Selection of the pump of which the operating
mode is required
1-2-6-2.2.1 #1-0 Duration (s) 1
2
3600
e e Duration of the manual run in seconds
1-2-6-3 Pump 1 e n Information on the operating status of rainwater
pump 1
1-2-6-3-1 Mode OFF
ON
e e Off: Rainwater pump 1 is not used. On: Rainwater
pump 1 is used
1-2-6-3-2 State OFF
ON
e n ON: pump is running, OFF: Pump is not running
1-2-6-3-3 Runtime 0
9000000
e n Accumulated Runtime of rainwater pump 1
Parameter
Display
text
Value
1
description
Min./Max.
Read
Write
Help text

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DP Megacontrol Series and is the answer not in the manual?

DP Megacontrol Series Specifications

General IconGeneral
BrandDP
ModelMegacontrol Series
CategoryControl Unit
LanguageEnglish