DP Megacontrol Series - Time, Statistics, and Debugging Parameters; System Time, Statistics, and Debugging

35
1-2-6-3-4 Starts 0
9000000
e n Amount of pump starts of rainwater pump 1
1-2-6-4 Pump 2 e n Information on the operating status of rainwater
pump 2
1-2-6-4-1 Mode OFF
ON
e e Off: Rainwater pump 2 is not used. On: Rainwater
pump 2 is used
1-2-6-4-2 State OFF
ON
e n ON: pump is running, OFF: Pump is not running
1-2-6-4-3 Runtime 0
9000000
e n Accumulated Runtime of rainwater pump 2
1-2-6-4-4 Starts 0
9000000
e n Amount of pump starts of rainwater pump 2
1-3 Time and statistics e n Operating time and statistics
1-3-1 Act runtime Op hours e n Operating hours of the system in HHHHHH
1-3-2 Time to service e n Period of time until next service / maintenance
1-3-3 Act Minimum Runtime e n Actual minimum pump runtime in seconds
1-4 Debugging f f
1-4-1 Reset cause No Reset
Power ON Reset
Ext. Watchdog Reset
Watchdog Reset
Software Reset
fn
1-4-2 Power ON res. count f n Power On reset counter
1-4-3 ExtWatchdogResCount f n ExtWatchdogResCount
1-4-4 Software res. count f n Software reset counter
1-4-5 Clear reset cause f f Clear reset cause counter
1-4-6 OS Error f n OS Error
1-4-7 hmiRamUsed d n
1-4-8 hmiRomUsed d n
1-4-9 hmi temperature d n
1-4-10 ioRamUsed d n
1-4-11 ioRomUsed d n
1-4-12 Pump Load O/P OFF
ON
nn
1-4-13 PID Output d n
1-4-14 PID before MinMax d n
1-4-15 MPO Electrical Power d n
1-4-16 MPO Shaft Power d n
1-4-17 MPO Trigger Reason d n
1-4-18 MPO Shaft Power P1 d n
1-4-19 MPO Shaft Power P2 d n
Parameter Display text Value
1
description Min./Max.
Read Write Help text