DP Megacontrol Series User Manual

36
10.1.2 Diagnosis (Quick access button "traffic light")
Table 40: Parameter list Megacontrol version 1.7.1
10.1.3 Settings (Quick access button "tool set")
Table 41: Parameter list Megacontrol version 1.7.1
1-4-20 MPO Shaft Power P3 d n
1-4-21 MPO Shaft Power P4 d n
1-4-22 MPO Shaft Power P5 d n
1-4-23 MPO Shaft Power P6 d n
1-4-24 Debug Mode no debugging
0x0A041 in minutes
dd
1. Bold is Factory setting.
Parameter Display text Value description Min./Max. Read Write Help text
2 Diagnosis e n Monitoring and diagnosis
2-1 General e n General diagnosis and monitoring functions
2-1-1 Active Messages e c Actual failure and warning messages
2-1-2 History e n History of all failure and warning messages
2-1-3 Acknowledge All e e Accept / Acknowledge all failure and warning mes-
sages
2-1-4 Clear History s s Deleting the history of all failure and warning mes-
sages
Parameter Display text Value
1
description Min./Max. Read Write Help text
3 Settings e n Settings
3-1 HMI e n Human Machine Interface (HMI)
3-1-1 Basic settings e n Basic settings for HMI
3-1-1-1 Language English
Deutsch
Nederlands
Francais
polish
Türk
e e Language settings
3-1-1-2 Backlight e e Backlight settings
3-1-1-2-1 Mode Always on
Timed off
e e The configuration of the display backlight (Note: a
long-term illumination will shorten the life time)
3-1-1-2-2 Backlight Time 10
600
999
e s Timer setting for automatic ending the back-light
after use
3-1-1-3 Displayed units e n Setting of the required units in which the system
values will be displayed
Parameter Display text Value
1
description Min./Max.
Read Write Help text

DP Megacontrol Series Specifications

General

Brand	DP
Model	Megacontrol Series
Category	Control Unit
Language	English