DP Megacontrol Series User Manual

37
3-1-1-3-1 Pressure kPa
bar
PSI
feet
mwc
e s Unit for the pressure values
3-1-1-3-2 Height cm
m
e s Unit for the values of the water level height in the
receiver tank (storage tank at suction side)
3-1-1-3-3 Temperature °C
°F
e s Unit of the temperature when temperature sensor
is available (WSD functionality)
3-1-1-4 LCD Contrast e e Setting of the LCD contrast
3-1-1-4.1.1 #0-0 contrast 5
13
20
ee
3-1-2 Fieldbus n n Fieldbus Settings
3-1-2-1 Fieldbus Type no module
Profibus
Modbus
n n Type of the connected fieldbus module
3-1-4 Logo s n Setting of the required logo at system (reboot)
3-1-4-1 Logo dp
None
s s Setting of the required logo at system (reboot
3-2 Device e n Device-specific settings
3-2-1 Login e n Login to have access to the required user level
3-2-1-1.1 PIN e n Enter access level and personal identification
number
3-2-1-1.1.1 #0-0 Access Level User Level
Service Level
Factory Level
e e Access Level
3-2-1-1.1.2 #0-1 PIN acceptance 0
9999
e e PIN acceptance message
#0-0 Login Login ok
Login failed
eeLogin
3-2-1-1.2 PIN f n Enter access level and personal identification
number
3-2-1-1.2.1 #0-0 Access Level User Level
Service Level
Factory Level
Development Level
f f Access Level
3-2-1-1.2.2 #0-1 PIN acceptance 0
9999
f f PIN acceptance message
#0-0 Login Login ok
Login failed
f e Login
3-2-1-2 Login required no
yes
c c Login procedure required yes/no
3-2-2 Service c n Service settings
3-2-2-1 Factory setting c c Reset to factory basic / default parameter settings
#0-0 Reset default param. Reset ok
No set available
c c Reset to basic / default parameter settings
3-2-2-2 Reset Srv Interval s s Reset the service interval
#0-0 Reset Srv Interval OK
Failed
s s Reset the service interval
3-2-2-3 Customer setting c c Load locally saved parameters
Parameter Display text Value
1
description Min./Max. Read Write Help text

DP Megacontrol Series Specifications

General

Brand	DP
Model	Megacontrol Series
Category	Control Unit
Language	English