38
#0-0 Load loc. param. Reset ok
No set available
c c Load locally saved parameters
3-2-2-4 Save custom. setting c c Save of the customer setting
3-2-2-5 Save factory setting f f Save of the factory settings
3-2-2-6 Default setting s s Reset to default setting
3-2-2-6.1.1 #0-0 Reset default param. default
Hyamat K
Hyamat V
Hyamat SVP
HyaEco VP
s s Reset to basic / default parameter settings
3-2-2-7 Edit Pump Opera. hrs s s Edit Pumps operating hours
3-2-2-7.1.1 #0-0 Pump number 1
3
s s Pump number
3-2-2-7.2.1 #1-0 Hours 0
500000
ssHours
3-2-2-7.2.2 #1-1 Minutes 0
59
s s Minutes
3-2-2-7.2.3 #1-2 Seconds 0
59
s s Seconds
3-2-2-8 Reset Sys. Oper. hrs s s Reset the system operating hours
#0-0 Reset Oper. hours OK
Failed
s s Reset the system operating hours
3-2-2-9 Reset hrs/starts s s Reset pump operating hours and pump starts
3-2-2-9.1.1 #0-0 Pump number 1
3
s s Pump number
3-2-2-10 Rainwater pumps s s
3-2-2-10-1 Reset hrs/starts s s Reset pump operating hours and pump starts
3-2-2-10-1.1.1
#0-0
Pump number 1
2
s s Pump number
3-2-3 Factory Test f n
3-2-3-1 Factory Test f f
3-2-3-1.1.1 #0-0 Test result Failed
Passed
ff
3-3 Configuration e n System configuration
3-3-1 Number of pumps 1
3
6
e s Total number of pumps in the system
3-3-2 Inlet Switch
Pressure
Flow Control
Level / valve on-off
Level / valve prop.
Rainwater
e s Setting of the applicable configuration at the inlet
connection (suction side of the system)
3-3-3 Discharge Fixed speed
One jockey
Two jockey
VFD chang-over
VFD fixed all
e s Setting of the applicable configuration at the dis-
charge connection (pressure side of the system)
Parameter
Display
text
Value
1
description
Min./Max.
Read
Write
Help text
To Next Page
Loading...