9
Polaris base station indicators
The status indicators have the following meanings:
Blue on: The master base station is in normal mode.
Blue flash: The master base station is just started up or unstable due
to some shake.
Green on: The slave base station is in normal mode.
Green flash: The slave base station is just started up, or fails to
receive signals from the master base station, or is unstable due to
some shake.
Red: The slave base station has internal fault.
Red flash: The base station does not work normally due to
interference from other base stations.
The Polaris controller is used for interacting with objects within the
VR world. It has sensors that are traceable by the Polaris base
station.
Hint: Several laser sensors are located in the circular region at the
tip of the controller. Be sure that the laser sensors receive well laser
signals from the base station, do not cover the circular region at the
controller tip with any extra material. In addition, keep the sensors
at the controller tip clear of blocking by hands or any other items.
Introduction
4. Polaris controller
To Next Page
Loading...