50
Verify setup
After the E3 Polaris setup process is completed, you may wear the
headset and grab the Polaris controllers to explore the VR.
Motion within maximum 6m diagonal area is supported. For the
Room Scale setup, the gaming zone shall be at least 2mx2m. For
the experience in standing/sitting position, there is no required for
minimum space.
What is the space size recommended for the gaming zone?
We do not recommend that. In planning the boundary for the
gaming zone, make sure there is no obstacle on the floor.
Do not include the space occupied by desk or chair. They may trip
you during your VR exploration.
Can the furniture footprint be included in the gaming zone?
1. Press the Menu button on the controller to bring the main
control panel of the Steam VR system.
2. Select Setup ->VR setup.
3. Select New Standing Status, and complete the process by
following the on-screen instructions.
To set or reset the standing status in the VR, execute the following
steps:
Even though you have the Room Scale setup, you can still use the
VR application that has been designed for standing/sitting
position, as long as the headset and Polaris controllers can be
traced within the gaming zone.
For the VR application applicable only for standing/sitting
position, is it applicable for Room Scale setup as well?
To Next Page