31
English
30
5) Language Setting
This submenu allows you to specify the audio/video output <Figure 6-2-4>
- Menu Language : Set the default Menu language.
- Audio Language : Set the default audio language when selecting a channel.
- Subtitle Language : Set the default subtitle language.
6) A/V Output Setting
This sub menu allows you to set audio/video output setting.
See (6.1 Getting Started 3) A/V Output Setting) for detailed description.
7) Front Display Setting
This submenu allows you to set the Standby Mode. <Figure 6-2-5>
- Standby Mode : Select the standby Mode. (Normal / Power Saving)
6.2 System Setting
<Figure 6-2-4>
<Figure 6-2-5>
6.2 System Setting
4) Parental Control
This submenu allows you to set password options and to lock or unlock access to menus
ҫ
Note : PIN code and password are the same). <Figure 6-2-3>
- Receiver Lock : Set ON to require entering a PIN code at powering on.
- Install Lock : Set ON to require entering a PIN code to access the installation menu.
- Channel Lock : Set ON to require entering a PIN code to access the channels menu.
- Lock Channel Confirm : Set ON to require entering a PIN code to access a locked
channel.
- Age Limit : Set to prevent children or unauthorized people from watching programs.
Select among (Free/ 8 above/12 above/15 above/18 above). When
program information (age limit) is available from broadcaster and this age
limit exceeds the selection, a PIN code is required to access the
channel/program.
- New Password : Enter the new password that you want to set.
- Verify Password : Enter the new password again for confirmation.
ҫ
Note : The default password is ‘0000’.
<Figure 6-2-3>
To Next Page
Loading...