49
English
48
6.7 Common Interface
2) The Status of the CAM
⊹
You can access detailed information about the CAM using the / keys in the Main
Menu to select ‘CI’ and pressing . <Figure 6-7-2>
⊺
Proceed with further instructions displayed on the screen to check more detailed
information depending on the CAM in use.
ҫ
Note : Further detailed information is not mentioned in this manual since the
information depends on the CAM in use.
<Figure 6-7-2>
6.7 Common Interface
1) CAM Initializing
To enjoy scrambled channels, you will need a Common Interface Conditional Access
Module (CAM) and a Smart Card from the service provider (program distributor). If you
are subscribing to services from more than one service provider, you will need a Smart
Card from each one, and may even need different CAMs (depending on the DVB
Common Interface standard each uses). Since a Smart Card is connected to a single
service provider, a limited range of channels will be available via it.
ҫ
Note : Without the CAM and the smart card, you can watch only Free-to-Air programs.
⊹
Insert a CAM into a receiver’s slot designed for it, and a Smart Card into the CAM.
⊺
The message ‘CAM Initializing’ will appear on the screen. <Figure 6-7-1>
⊻
After the message ‘CAM Initializing’ has disappeared, you can select the channel that
you want to watch.
<Figure 6-7-1>
To Next Page
Loading...