51
English
50
2) The Status of the Smart Card
⊹
You can access detailed information about the Smart Card using the / keys in
the Main Menu to select ‘CA’ and pressing . <Figure 6-8-2>
⊺
Proceed with further instructions displayed on the screen to check more detailed
information depending on the Smart Card in use.
ҫ
Note: Further detailed information is not mentioned in this manual since the
information depends on the Smart Card in use.
<Figure 6-8-2>
6.8 Conditional Access System6.8 Conditional Access System
1) Card Initializing
To Enjoy CONAX CAS7 scrambled channels, you will need a Smart Card from the service
provider (program distributor). If you are subscribing to services from more than one
service provider, you will need a Smart Card from each one. Since a Smart Card is
connected to a single service provider, a limited range of channels will be available via
it.
ҫ
Note : Without the Smart Card, you can watch only Free-To-Air programs.
⊹
Insert the Smart Card into the receiver’s slot designed for it.
⊺
The message ‘Smart Card Initializing’ will appear on the screen. <Figure 6-8-1>
⊻
After the message ‘Smart Card Initializing’ has disappeared, you will be able to watch
the channels offered by the service provider.
<Figure 6-8-1>
To Next Page
Loading...