7
English
6
4.2 Rear Panel
Controls/Functions
4.1 Front Panel
Power : Switches the receiver between “Standby” and “Power ON” modes.
Menu : To enter or exit the main menu.
Select : To show the Channel List in non-menu mode and select on item or confirm in
menu mode.
- VOL
ȜȞ : To change the volume level in non-menu mode and modify a setting
in menu mode.
- CH ƌƊ : To switch channels or change the cursor position on the application
screen.
76
54
3
2
1
2 6
1 3 7
No. Name Connector Function
1 LNB INPUT IEC 169-24 FEMALE IF input from LNB to digital tuner
2 LNB OUTPUT IEC 169-24 FEMALE IF loop-through output from digital tuner
3 S/PDIF Fiber Optic Digital audio output (Optical)
4 USB USB A-type USB 2.0
5 TV SCART SCART Video output(CVBS, RGB)
Audio output(R, L)
6 RS-232C DB-9 Low speed serial port
7 LAN RJ-45 10/100Mbps Ethernet
8 HDMI HDMI Digital Video/Audio Output
9 VIDEO RCA cinch Composite video output
10 AUDIO L RCA cinch Left audio output
11 AUDIO R RCA cinch Right audio output
12 Y RCA cinch Component video output(Y)
13 Pb RCA cinch Component video output(Pb)
14 Pr RCA cinch Component video output(Pr)
1 6
9 124 10 13
2 3 54
7 8 11 14
54